package i18n // English is the baseline catalogue. The drift-guard test reflects over its // fields, so every other catalogue must populate the same set. var English = Messages{ WelcomeTitleFmt: "Welcome to %s", NoConfigYet: "No configuration found yet — let's set it up.", InitHint: "Project memory (AGENTS.md) is generated in-session: run `reasonix`, then `/init` — the model analyzes the codebase and writes it. For configuration, use `reasonix setup`.", ChatTip: "Context is kept across turns. Type 'exit' or Ctrl-D to quit.", TurnCancelled: "cancelled — back to prompt", InterruptedRecovery: "This turn was interrupted. Partial output is kept for reference; only completed tool pairs and a bounded recovery summary enter the next model turn. Inspect the workspace before continuing or reverting changes.", FinalReadinessRecovery: "Task work or completion checks are paused. Run /continue-checks to preserve completed evidence and finish the remaining work.", ReadinessContinuing: "Reasonix is finishing the remaining task work or checks automatically.", RecoveryPaused: "Automatic retries paused. Reasonix stopped repeated attempts and kept completed work. Send “Continue” to start a fresh attempt, or add instructions to change direction.", CompletionUncertain: "Completion could not be confirmed. The current result and completed work are kept. Send \"continue\" to resume, or restate what should change.", ReceiptVerified: "nothing left unverified", ReceiptGapsHeader: "not verified:", ReceiptRisksHeader: "declared risks:", ReceiptMore: "and %d more", ReceiptGapKinds: map[string]string{ "unbacked_claim": "claimed but unsupported", "unproven_criterion": "criterion without proof", "missing_check": "expected check never passed", "failed_verification": "verification failed", "stale_verification": "verified before the last change", "unverified_change": "changed with nothing verifying it", "unreviewed_change": "changed, never looked at again", "declared_unverified": "declared unverified", }, NoSessionToResume: "no saved session to resume — start a new one with `reasonix`", ResumeRequiresTTY: "--resume needs an interactive terminal; pass --continue for the most recent session", PickSessionLabel: "Resume which session?", ResumeBusy: "finish or cancel the current turn before resuming", ResumeBadIndexFmt: "pick a session 1–%d (run /resume to list)", ResumeAlreadyActive: "already in that session", ResumedTitle: "resumed session", RenameUsage: "usage: /rename or /rename ", RenameNoSession: "no active session to rename", RenameDoneFmt: "session renamed to %q", ResumePickTitle: "Resume a saved session", ResumePickHint: "↑/↓ move · Enter resume · Esc cancel", ResumeRecoveryBadgeFmt: "[recovery copy · parent %s]", ChatThinking: "thinking…", ChatThoughtForFmt: "thought for %ds", ChatStatusThinkingFmt: "%s thinking… (%ds · Esc cancels)", TurnPhaseWorking: "working", TurnPhaseChecking: "checking", TurnPhaseVerifying: "verifying", TurnPhaseReviewing: "reviewing", CompletionSummaryBlocked: "This turn is blocked; review the changes for details.", CompletionSummaryNeedsAttention: "This turn still has verification or review gaps.", ChatToolWorkingFmt: "%s working · %ds", ChatSubagentPhaseQueued: "queued", ChatSubagentPhaseRunning: "running", ChatSubagentPhaseReasoning: "reasoning", ChatSubagentPhaseResponding: "responding", ChatSubagentPhaseTool: "using tools", ChatSubagentPhaseRetrying: "retrying", ChatSubagentPhaseCompleted: "completed", ChatSubagentPhaseFailed: "failed", ChatSubagentPhaseCancelled: "cancelled", ChatSubagentProgressFmt: "%s · %ds · %ds ago", ChatSubagentProgressDoneFmt: "%s · %ds", ChatSubagentPreviewLabel: "▎", ChatStatusRetryingFmt: "%s retrying (%d/%d)… (Esc cancels)", ChatStatusCancellingFmt: "%s stopping… (%ds · Ctrl+C exits)", ChatStatusIdle: "ready", ChatStatusYoloIdle: "tool approvals skipped", ChatStatusCycleHint: "Shift+Tab ask/auto/plan · Ctrl+Y YOLO", ChatStatusCycleHintCompact: "Shift+Tab ask/auto/plan · Ctrl+Y YOLO", ChatTurnReceiptLabel: "TURN", RateBandPeak: "peak", RateBandOffPeak: "off-peak", RateBandMixed: "mixed rates", ChatStatusModelLabel: "MODEL", ChatStatusEffortLabel: "EFFORT", ChatStatusCacheLabel: "CACHE", ChatStatusContextLabel: "CTX", ChatStatusCompactLabel: "COMPACT", ChatStatusJobsLabel: "JOBS", ChatStatusBalanceLabel: "BAL", ChatStatusCostLabel: "COST", ChatStatusCacheNowFmt: "turn hit %s", ChatStatusCacheAvgFmt: "avg %s", ChatStatusPlanApproval: "1 execute · 2 revise · 3 exit without executing · n/Esc keeps planning · PgUp/PgDn/Ctrl+Home/End scrolls", PlanApprovalPrompt: "Plan ready above — choose what to do next", PlanApprovalChoices: "1. Start execution\n2. Revise plan (keep planning)\n3. Exit without executing\nChoose [1/2/3] (y starts; n/Esc keeps planning)", ChatStatusToolApproval: "1 approve once · 2 allow scope this session · 3/4 prefix or save when offered · n/Esc deny · Ctrl-C cancels turn", AskTypeSomething: "Type something else", AskTypingHint: "type below, Enter to confirm", AskChatInstead: "None — just chat", ChatStatusQuestion: "↑/↓ move · number to pick · space multi · Enter confirm · ←/→ switch · Esc cancel", StatusResumePicker: "↑/↓ move · Enter resume · Esc cancel", AskSubmitTitle: "Submit answers", AskUnanswered: "(unanswered)", AskSubmitHint: "Enter submits · ← returns to edit", ElicitURLHint: "o opens the link · Enter accepts · d declines · Esc cancels", ElicitConfirmOnly: "Confirm with Enter; d declines; Esc cancels.", ElicitUnanswered: "(unanswered)", ElicitSubmit: "Submit", ElicitSubmitHint: "Enter edits the field · tab advances · on Submit: Enter accepts, d declines, Esc cancels", ToolApprovalPromptFmt: "Permission required\n\nWill call tool %s%s.\n%s\n%s", ToolApprovalChoices: "1. Allow once\n2. Allow %s for this session\n3. Always allow %s (save to config)\n4. Deny\nChoose [1/2/3/4] (y/a/p/n also work)", BashPrefixChoices: "1. Allow once\n2. Allow %s for this session\n3. Always allow %s (save to config)\n4. Deny\nChoose [1/2/3/4] (y/a/p/n also work)", PlanModeReadOnlyCommandChoices: "1. Trust once\n2. Trust this prefix for this session\n3. Always trust this prefix for plan mode (save to config)\n4. Deny\nChoose [1/2/3/4] (y/a/p/n also work)", FreshHumanApprovalChoices: "1. Allow once\n2. Deny\nChoose [1/2] (y/n also work)", RecoveryApprovalChoices: "1. Continue once\n2. Try another approach", RecoveryPlanChangeChoices: "1. Adopt the new plan and continue\n2. Do not adopt; let Auto adjust", RecoveryPlanDecisionPrompt: "The execution plan needs your decision", RecoveryPlanBeforeFmt: "Previous plan: %s", RecoveryPlanAfterFmt: "Proposed plan: %s", RecoveryTaskGrantChoices: "1. Continue once\n2. Continue and allow similar actions in this task\n3. Try another approach", SandboxEscapeApprovalChoices: "1. Allow once\n2. Use real environment for this session\n3. Deny\nChoose [1/2/3] (y/a/n also work)", ApprovalNeededFmt: "approval needed: %s", ApprovalNeededWithSubjectFmt: "approval needed: %s %s", ToolApprovalSourceFmt: "Source: %s", ToolApprovalBuiltIn: "built-in tool", ToolApprovalImageUse: "It will read provided image input for image understanding.", ApprovalToolLabelBash: "bash", ApprovalToolLabelEditFile: "edit file", ApprovalToolLabelWriteFile: "write file", ApprovalToolLabelMultiEdit: "multi edit", ApprovalToolLabelMoveFile: "move file", ApprovalToolLabelWebFetch: "web fetch", ApprovalToolLabelRunSkill: "run skill", ApprovalToolLabelRemember: "remember", ApprovalToolLabelForget: "forget", ApprovalToolLabelSandboxEscape: "bash sandbox escape", ApprovalToolLabelPlanModeReadOnly: "plan-mode read-only command", MemoryApprovalSaveUpdate: "Save/update memory", MemoryApprovalBodyLabel: "body", MemoryApprovalArchiveFmt: "Archive memory %q", PlanModeBashTrustSubjectFmt: "Trust %q as a read-only command prefix while planning\nCommand: %s", PlanModeBashTrustReason: "This bash command is not in Reasonix's built-in read-only set. Confirm only if this exact prefix is read-only for planning and research. Auto/YOLO approval cannot answer this trust prompt.", PlanModeBashTrustDeclined: "the user declined to trust this bash command as read-only for plan mode - do not retry it; continue with other trusted read-only tools or ask how to proceed.", SandboxEscapeSubjectFallback: "run shell command unconfined once", SandboxEscapeSubjectPrefix: "run unconfined once: ", SandboxEscapeWrapReason: "Windows does not provide an OS-level Bash sandbox for this command. Run it unconfined one time? This bypasses OS isolation for this command only.", SandboxEscapeRuntimeReason: "The OS sandbox could not start this command. Run it unconfined one time? This bypasses OS isolation for this command only.", SandboxEscapeDeclined: "the user declined to run this command without the OS sandbox - do not retry it unconfined; ask how they would like to proceed.", ApprovalToolLabelConfigWrite: "Reasonix config write", ConfigWriteSubjectPrefix: "write Reasonix config: ", ConfigWriteReason: "This write targets a Reasonix-managed configuration file outside the workspace. It can change providers, sandbox rules, permissions, and MCP servers for future sessions, so it needs your explicit approval.", ConfigWriteDeclined: "the user declined this Reasonix config write - do not retry it; ask how they would like to proceed.", ConfigWriteApprovalChoices: "1. Allow once\n2. Allow for this session\n3. Deny\nChoose [1/2/3] (y/a/n also work)", WriteAccessApprovalChoices: "1. Allow once\n2. Allow these directories for this session\n3. Add to project allow_write (save to reasonix.toml)\n4. Deny\nChoose [1/2/3/4] (y/a/p/n also work)", WriteAccessHomeWarning: "This grants write access to your entire home directory. Reasonix session and runtime-state files stay protected.", WriteAccessMergedPermissionHint: "This choice also authorizes the current matching tool operation.", WriteAccessProjectHint: "Adding to the project writes [sandbox].allow_write (and the matching permission rule if needed) in this workspace's reasonix.toml.", PermissionSavedFmt: "permission saved to %s: %s", PermissionAlreadyAllowedFmt: "permission already covered in %s: %s", PermissionSaveFailedFmt: "permission save failed for %s: %v", PlanModeReadOnlyCommandTrustSavedFmt: "plan-mode read-only command trust saved to %s: %s", PlanModeReadOnlyCommandTrustAlreadyFmt: "plan-mode read-only command trust already saved in %s: %s", PlanModeReadOnlyCommandTrustFailedFmt: "plan-mode read-only command trust save failed for %s: %v", DiffFoldedFmt: "… +%d more lines", DiffFoldEnabledFmt: "diff folded to %d lines (/diff-fold to expand)", DiffFoldDisabled: "diff expanded — showing all lines (/diff-fold to fold)", OutputStyleNone: "no output styles available", ThemeHeader: "themes:", ThemeHint: "switch with /theme ", ThemeChangedFmt: "theme switched to %s / %s", ThemeUnknownFmt: "unknown theme %q", LanguageHeader: "languages:", LanguageHint: "switch with /language ", LanguageChangedFmt: "language set to %s (resolved: %s)", CurrencyHeader: "fee display currency:", CurrencyHint: "switch with /currency ", CurrencyChangedFmt: "fee display currency set to %s (resolved: %s)", RuntimeRefreshBusy: "finish or cancel active work and stop background jobs before changing this setting", RuntimeRefreshUnavailable: "runtime refresh is unavailable in this session", CompactionWorking: "compacting conversation…", CompactionTitle: "Context compacted", CompactionUnit: "messages", CompactionAuto: "auto", CompactionManual: "manual", ExtFormFieldsHint: "fields are collected through the usual prompts", ExtRunActionFmt: "run %s", SlashCompactFailed: "compaction failed", SlashNewDone: "new session started — previous transcript saved", SlashNewFailed: "could not start a new session", SlashClearPrompt: "Clear current context without saving?", SlashClearDone: "current context cleared", SlashClearFailed: "could not clear current context", SlashClsDone: "screen cleared", SlashUnknown: "unknown command", SlashUnknownSentAsMessage: "sent as a regular message", SlashTodoCleared: "task list dismissed", SkillPickerAvailableFmt: "%d available", SkillPickerMatchingFmt: "%d matching · %d total", SkillPickerHint: "↑↓ navigate · Space toggle · Enter save · / search · s sources · r rescan · Esc cancel", SkillPickerDetailHint: "↑↓ navigate · Enter select · Space toggle · Esc back", SkillPickerSearchEmpty: "No skills match your search", SkillPickerSearchPlaceholder: "Search skills...", SkillPickerSourceTitle: "Sources", SkillPickerSourceActiveFmt: "%d active", SkillPickerSourceHint: "↑↓ navigate · Enter skills · d diagnostics · s skills · r rescan · Esc close", SkillPickerDiagHidden: "d show diagnostics", SkillPickerDiagShown: "d hide diagnostics", SkillPickerBuiltinSource: "builtin", SkillPickerRescanned: "skills rescanned", SkillPickerNoDescription: "(no description)", SkillPickerScopeProject: "project", SkillPickerScopeCustom: "custom", SkillPickerScopeGlobal: "global", SkillPickerScopeBuiltin: "builtin", SkillPickerSubagent: "subagent", SkillPickerAvailableLabel: "on", SkillPickerDisabledLabel: "off", SkillPickerNoChanges: "Skills dialog dismissed: No changes", SkillPickerSourceSkillsHint: "↑↓ navigate · Space toggle · Enter details · Esc sources", SkillPickerSourceSkillsEmpty: "No skills in this source", SkillPickerActionToggle: "Toggle enabled", SkillPickerActionDelete: "Delete skill", SkillPickerDeleteTitleFmt: "Delete skill /%s?", SkillPickerDeleteConfirm: "Delete", SkillPickerDeleteCancel: "Cancel", SkillPickerDeleteHint: "Enter confirm · y delete · n/Esc cancel", SkillPickerDeletedFmt: "deleted skill %s", SkillPickerMoreAboveFmt: "↑ %d more above", SkillPickerMoreBelowFmt: "↓ %d more below", SkillPickerTokenFmt: "~%d tok", SkillPickerDetailMetaFmt: "Scope: %s Run as: %s", SkillPickerSkillsUnit: "skills", SkillPickerLinesUnit: "lines", SkillPickerStatusLabel: "skill picker", SkillPickerStatusOK: "ok", SkillPickerStatusMissing: "missing", SkillPickerStatusNotDir: "not-directory", SkillPickerStatusUnreadable: "unreadable", SlashPromptEmpty: "the MCP prompt returned no content to send", SlashMCPNone: "no MCP servers configured — add a [[plugins]] entry in reasonix.toml", CtrlCQuitHint: "press Ctrl+C again to quit", CompHintSlash: "↑/↓ move · Tab/Enter select · Esc close", CompHintFile: "↑/↓ move · Tab/Enter open folder or pick file · Esc close", MouseCopiedHint: "copied to clipboard", ClipboardCopyOSC52Hint: "copy sent via OSC 52 — terminal permission may be required", ClipboardCopyFallbackHint: "native clipboard unavailable — copy sent via OSC 52", ClipboardTextPasteRemoteHint: "mouse paste cannot read your local clipboard or PRIMARY selection over SSH — use the terminal paste shortcut or /mouse", ClipboardTextPasteFailedFmt: "paste text failed: %v", ClipboardImagePastingHint: "Pasting image…", ClipboardImagePasteFailedFmt: "paste image failed: %v", MouseCaptureOnHint: "mouse capture on — in-app drag-select/scrollbar/wheel active", MouseCaptureOffHint: "mouse capture off — your terminal now handles selection and right-click", MouseCaptureTag: "native mouse", ShellExecEmpty: "usage: ! (e.g. !ls -la)", ShellExecFailedFmt: "shell command failed: %v", ShellExecTimeoutFmt: "shell command timed out (> %s)", ShellModeHint: "Enter runs shell · Esc cancels · click output to expand", CmdNew: "start new session; save transcript", CmdClear: "discard current context", CmdCls: "clear screen only (keep LLM context)", CmdCompact: "compact context", CmdContinueChecks: "continue a paused final-readiness check", CmdContext: "show context window, thresholds, and last maintenance", CmdRewind: "rewind to an earlier turn", CmdTree: "show conversation branches", CmdBranch: "create a conversation branch", CmdSwitchBranch: "switch conversation branch", CmdResume: "resume a saved session", CmdRename: "rename a session", CmdModel: "switch model", CmdStatus: "show session status", CmdWorkMode: "deprecated: adaptive standard execution", CmdDocs: "search version-matched embedded documentation", CmdMemory: "inspect instructions, memory, and recovery", CmdMigrate: "retry legacy data migration", CmdGoal: "set or clear the active goal", CmdRemember: "save a memory note", CmdForget: "archive a saved memory", CmdMcp: "MCP servers", CmdRemote: "remote SSH hosts", CmdHooks: "manage hooks", CmdPlugins: "manage plugin packages", CmdPasteImage: "paste clipboard image", CmdOutputStyle: "list output styles", CmdTheme: "switch CLI theme", CmdLanguage: "switch CLI language", CmdCurrency: "switch fee display currency", CmdSkill: "manage skills", CmdVerbose: "toggle thinking text", CmdReloadCmd: "reload custom commands", CmdReload: "reload the agent runtime (tools, skills, commands, hooks, providers) keeping this session", CmdDiffFold: "toggle diff fold/expand", CmdSandbox: "show sandbox status", CmdEffort: "set reasoning effort", CmdMouse: "toggle in-app mouse capture (off = native terminal selection/right-click)", CmdReasonLang: "set visible reasoning language", CmdHelp: "list commands", CmdWeb: "continue this session in the Web UI", CmdTodo: "dismiss the task list", CmdQuit: "exit the session", CmdCopy: "pick a response to copy to clipboard", CmdExport: "export session as markdown", SlashCopyDone: "copied response to clipboard", SlashCopyEmpty: "no assistant response to copy", SlashCopyListHeader: "pick a response to copy:", SlashExportDoneFmt: "session exported to %s", SlashExportEmpty: "no messages to export", ArgSkillShow: "show a skill's body", ArgSkillNew: "scaffold a new skill", ArgSkillPaths: "show discovery paths", ArgMcpAdd: "connect a server", ArgMcpRemove: "disconnect a server", ArgMcpConnected: "connected", ArgHooksList: "list active hooks", ArgModelCurrent: "current", ArgEffortAuto: "use the model default", ArgEffortLow: "lighter reasoning", ArgEffortMedium: "balanced reasoning", ArgEffortHigh: "deeper reasoning", ArgEffortXHigh: "extra deep reasoning", ArgEffortMax: "maximum reasoning", ArgThemeCurrent: "current", ArgLanguageAuto: "auto-detect from REASONIX_LANG / locale", ArgLanguageEn: "English", ArgLanguageZh: "中文", ListModelsHeaderFmt: "models (active: %s)", ListModelsHint: "switch with the model switcher, or type /model ", ListMemorySaved: "saved memories", ListMemoryArchived: "archived memories", ListMemoryNone: "memory: none — add with “/remember ” or run /init to generate AGENTS.md", ListSkillsHeaderFmt: "skills (%d)", ListSkillsNone: "skills: none defined — invoke a built-in like /init, or author one with install_skill", ListHooksHeaderFmt: "hooks (%d active)", ListHooksNone: "hooks: none active — configure in .reasonix/settings.json (project) or /settings.json (global)", ListMcpHeader: "mcp servers", ListMcpNone: "mcp: no servers connected — add one in reasonix.toml ([[plugins]]) or a project .mcp.json", MemoryEditHint: "edit doc files or use “/remember ”; doc edits apply next session", ForgetUsage: "usage: /forget — the slug shown under “saved memories” in /memory", ForgetDoneFmt: "forgot and archived memory: %s", QuickRememberEmpty: "nothing to remember", QuickRememberDoneFmt: "remembered → %s", GoalEmpty: "goal: none — set one with /goal ", GoalCurrentFmt: "goal: %s", GoalSetFmt: "goal set → %s", GoalCleared: "goal cleared", GoalNotRunning: "no running goal to pause", GoalNotPaused: "no paused or blocked goal to resume", GoalPaused: "goal paused — /goal resume continues it", GoalPausedReason: "paused by the user", GoalPausedFmt: "goal is paused (%s) — use /goal resume to continue", GoalRuntimeFmt: "runtime: turns %d · requests %d · tokens %d · work time %s", GoalRuntimeLastReason: "last reason", ModelSwitchUnavailable: "model switching is unavailable in this session", ModelSwitchBusy: "finish or cancel active work and stop background jobs before switching models", ModelAlreadyOnFmt: "already on %s", ModelSwitchingFmt: "switching to %s…", ModelSwitchedFmt: "switched to %s (conversation carried over; prompt cache resets)", ModelListHeader: "models (/model to switch)", RuntimeSwitchPending: "wait for the current runtime switch to finish", RuntimeReloadQueued: "reload queued — will run when the current work finishes", RuntimeReloaded: "runtime reloaded", RuntimeReloadedGenerationFmt: "runtime reloaded (generation %d)", WorkModeUsage: "usage: /preset ", WorkModeDeprecatedNotice: "Execution modes are now a session quality floor: /preset standard (default) or /preset delivery. Light has been folded into standard; the adaptive policy already runs light work lightly.", QualityFloorApplied: "Quality floor set: subsequent turns use the delivery completion gates.", RewindNone: "nothing to rewind yet", RewindCodeConversation: "Code + conversation", RewindConversationOnly: "Conversation only", RewindCodeOnly: "Code only", RewindFork: "Fork", RewindSummarizeFrom: "Compress after here (history kept)", RewindSummarizeUpto: "Compress before here (history kept)", RewindPickTitle: "⟲ Rewind — pick a turn", RewindPickHint: "↑/↓ move · Enter choose · Esc close", RewindRestoreTitleFmt: "⟲ Restore to turn %d ", RewindApplyHint: "↑/↓ · Enter apply · Esc back", RewindCoverageTitle: "⚠ Partial file coverage", RewindCoverageWarningFmt: "%d coverage gap(s) mean some file changes may not be restored.", RewindConfirmHint: "Enter/y confirm · Esc back", RewindUnavailableFmt: "rewind unavailable: %s", RewindEmpty: "(empty)", EnterAPIKeysHeader: "Enter API keys (Enter to skip and set later):", WroteFileFmt: "Wrote %s", SetupComplete: "Setup complete.", SetupCancelled: "setup cancelled.", TryHintFmt: "Try: %s", NextHint: "Next: set your API key (run `reasonix setup` or export DEEPSEEK_API_KEY=...), then run `reasonix run \"your task\"`.", ConfirmReconfigureFmt: "%s already exists. Reconfigure and overwrite?", NotOverwritingFmt: "%s already exists; not overwriting", SetupManagerTitle: "Provider configuration", SetupAddOpenAI: "Add OpenAI-compatible provider", SetupAddAnthropic: "Add Anthropic-compatible provider", SetupProviderExistsFmt: "Provider %q already exists. Manage the existing provider to edit its models or settings.", SetupSaveExit: "Save and exit", SetupSaveExitDesc: "write staged changes", SetupCancel: "Cancel", SetupCancelDesc: "discard all staged changes", SetupModelsUnit: "models", SetupKeySet: "key set", SetupKeyMissing: "key missing", SetupDefaultBadge: "default", SetupProviderActionsFmt: "Manage %s", SetupEditProvider: "Edit provider", SetupUpdateKey: "Update API key", SetupTestRefresh: "Test connection / refresh models", SetupSetDefault: "Set default model", SetupRemoveProvider: "Remove provider", SetupBack: "Back", SetupPromptModels: "Models (comma-separated)", SetupSharedKeyWarningFmt: "%s is also used by %s at %s. Share this credential?", SetupPromptAPIKeyFmt: "Enter new value for %s", SetupSelectDefaultModel: "Select default model", SetupConfirmRemoveFmt: "Remove provider %s?", SetupSummaryTitle: "Pending changes:", SetupSummaryAddedFmt: "Added: %s", SetupSummaryEditedFmt: "Edited: %s", SetupSummaryRemovedFmt: "Removed: %s", SetupSummaryDefaultFmt: "Default model: %s", SetupSummaryKeysFmt: "API keys updated: %d", SetupSummaryNoChanges: "No changes", SetupConfirmSave: "Save these changes?", SetupConcurrentChangeFmt: "Configuration changed while setup was open (%s). No staged setup changes were saved; run setup again to review the latest configuration.", // model fetching FetchingModelsFmt: "Fetching models for %s...", FetchModelsSuccessFmt: "Found %d models for %s", FetchModelsFailedFmt: "Failed to fetch models for %s: %v", FetchModelsUsingPresetsFmt: "Live fetch unavailable for %s, using preset model list", SelectModelsLabel: "Select models to enable for %s", CustomFetchEmpty: "/models returned an empty list — falling back to manual entry", AnthropicFetchEmpty: "/models returned an empty list — Anthropic-compatible providers usually don't expose one, falling back to manual entry", APIKeyAlreadySetFmt: "reusing existing value for %s", APIKeyResetPromptFmt: "Re-enter %s?", InvalidAPIKeyEnvFmt: "%q is not a valid API Key variable name. Use letters, numbers, and underscores (for example, MY_PROVIDER_API_KEY); do not enter a model name.", RepairedAPIKeyEnvFmt: "provider %s: replaced invalid API Key variable name %q with %q", // custom provider CustomProviderDesc: "Add third-party OpenAI compatible model", CustomAddMethodLabel: "Add third-party OpenAI compatible model - Select add method", CustomMethodManual: "Enter model name manually", CustomMethodURL: "Fetch models from URL", CustomPromptModel: "Enter model name", CustomPromptBaseURL: "Enter Base URL", CustomPromptKeyEnv: "API Key variable name (press Enter to use the default; not the model name)", CustomPromptAPIKey: "Enter API Key", CustomPromptWindow: "Context window in tokens (a value below the model's real window makes compaction fire early)", CustomAddedFmt: "Added custom model: %s", // Anthropic compatible provider AnthropicProviderDesc: "Add third-party Anthropic compatible model", AnthropicAddMethodLabel: "Add third-party Anthropic compatible model - Select add method", AnthropicMethodManual: "Enter model name manually", AnthropicMethodURL: "Fetch models from URL", AnthropicPromptModel: "Enter model name", AnthropicPromptBaseURL: "Enter Base URL", AnthropicPromptKeyEnv: "API Key variable name (press Enter to use the default; not the model name)", AnthropicPromptAPIKey: "Enter API Key", AnthropicAddedFmt: "Added Anthropic compatible model: %s", AnthropicFetchingModelsFmt: "Fetching models for %s...", AnthropicFetchModelsSuccessFmt: "Found %d models for %s", AnthropicFetchModelsFailedFmt: "Failed to fetch models for %s: %v", AnthropicSelectModelsLabel: "Select models to enable for %s", RemoteConnectingFmt: "connecting to %s…", RemoteConnectedFmt: "connected to %s", RemoteReconnectingFmt: "reconnecting to %s (attempt %d)…", RemoteDegradedFmt: "connected to %s, but some forwards are down", RemoteDisconnected: "disconnected (remote serve keeps running)", RemoteServeReadyFmt: "remote serve ready: %s", RemoteHostKeyPromptFmt: "unknown host key for %s\n type: %s\n fingerprint: %s", RemotePassphrasePromptFmt: "passphrase for %s:", RemotePasswordPromptFmt: "password for %s:", RemoteBootstrapStepFmt: "remote serve: %s %s", RemoteNoHostsHint: "no remote hosts configured; add one with `reasonix remote add [user@]host`", UnknownCommandFmt: "unknown command %q", UsageRunHint: "usage: reasonix -p [--model NAME] ", ErrorPrefix: "error:", ReconfigureOnUnknownModel: "Configured model is no longer available — re-running setup.", WriteConfigErr: "write config:", WriteEnvErr: "write .env:", ProviderErrBadRequest: "Malformed request (HTTP 400): the request body was rejected. This is likely a bug — please report it if it persists.", ProviderErrContextOverflowFmt: "This request exceeds the shared context window: prompt %d + completion %d = %d tokens, but the window is %d. Compact, retry with a smaller output cap, fork, or rewind, then send again.", ProviderErrAuth: "Authentication failed (HTTP 401): your API key is missing or unset. Add it to .env or run `reasonix setup`.", ProviderErrAuthRejected: "Authentication failed (HTTP 401): the server rejected your API key. It may be wrong or expired, or the provider hit a transient auth/quota issue — retried with backoff and still failed. Try again shortly, or check the key in .env / run `reasonix setup`.", ProviderErrModelFormatMismatch: "Model/API format mismatch: the server does not support this model on the selected provider route. This is not an invalid API key; choose a provider route that supports the model.", ProviderErrOpenCodeGoGrokRoute: "For OpenCode Go, use the OpenCode Go Responses preset with `grok-4.5`.", ProviderErrInsufficientBalance: "Insufficient balance (HTTP 402): your account is out of credit. Top up your account, then retry.", ProviderErrUnprocessable: "Invalid parameters (HTTP 422): a request parameter was rejected. This is likely a bug — please report it if it persists.", ProviderErrInputSensitive: "MiniMax rejected the input during content review (error 1026). The review may include conversation history and tool results; adjust the relevant content or start a new session with only the necessary context. Repeating the same request is unlikely to help.", ProviderErrOutputSensitive: "MiniMax rejected the generated output during content review (error 1027). Adjust the request and try again, or use another provider if the rejection persists.", ProviderErrRateLimited: "Rate limit reached (HTTP 429): too many requests (TPM/RPM). Retried with backoff — slow down or try again shortly.", ProviderErrServer: "Server error (HTTP 500): the provider hit an internal fault. Retried with backoff; if it keeps failing, try again later.", ProviderErrServerBusy: "Server busy (HTTP 503): the provider is overloaded. Retried with backoff; please try again shortly.", SelectOneHint: "(↑/↓ · Enter · q to cancel; / to search)", SelectManyHint: "(↑/↓ · Space · Enter · q; / to search)", SelectMoreAboveFmt: " ↑ %d more above", SelectMoreBelowFmt: " ↓ %d more below", SelectSearchHint: "/ to search · type to filter · Esc cancel search", CmdProvider: "switch provider", ProviderListHeader: "providers (/provider to switch)", ProviderAlreadyOnFmt: "already using provider %s", ProviderUnknownFmt: "unknown provider %q", ProviderPickLabel: "Select a model from %s", ProviderNoModelsFmt: "provider %s has no configured models", // self-update UpgradeChecking: "Checking for updates…", UpgradeChannelDeprecated: "Release channels are retired; using the official release.", UpgradeDevBuild: "dev builds cannot self-update", UpgradeFetchFailed: "failed to check for updates: %v", UpgradeInvalidVersion: "remote version is not valid semver", UpgradeAlreadyLatest: "Already on the latest version.", UpgradeForcing: "Reinstalling the same version…", UpgradeAvailableFmt: "Current: %s → Latest: %s", UpgradeNoAssetFmt: "no binary found for %s", UpgradeDownloadingFmt: "Downloading %s (%s)…", UpgradeDownloadFailed: "download failed: %v", UpgradeVerifying: "Verifying checksum…", UpgradeChecksumFailed: "could not fetch checksum file: %v", UpgradeChecksumMismatchFmt: "SHA256 mismatch: got %s, want %s", UpgradeChecksumNotFoundFmt: "%s not found in SHA256SUMS", UpgradeExtractFailed: "failed to extract binary: %v", UpgradeApplying: "Replacing binary…", UpgradeApplyFailed: "failed to apply update: %v", UpgradeSuccessFmt: "Updated %s → %s", ReportNoPending: "No pending CLI crash reports.", ReportHeaderFmt: "CLI crash report %s", ReportCapturedFmt: "Captured: %s", ReportPreviewOnlyFmt: "Preview only. Run `reasonix report send %s` to send this report.", ReportSendPrompt: "Send this sanitized report to crash.reasonix.io?", ReportKept: "Report kept locally.", ReportDeletedFmt: "Deleted CLI crash report %s.", ReportSentFmt: "Sent CLI crash report %s.", ReportConfigFailedFmt: "cannot load network configuration: %v", ReportUploadFailedFmt: "report upload failed; the local report was kept: %v", ReportSentDeleteFailedFmt: "report was sent but the local copy could not be deleted: %v", ReportUsageBody: `Usage: reasonix report preview the newest local report and confirm sending reasonix report list list local CLI crash reports reasonix report show [ID] preview a report (newest when ID is omitted) reasonix report send [ID] send a reviewed report and delete it after success reasonix report delete [ID] delete a local report without sending`, CLITelemetryConsentNotice: "Reasonix can send anonymous, content-free CLI usage statistics to crash.reasonix.io: a random install ID, version, OS, and fixed quality buckets. It never sends prompts, answers, code, paths, model or tool content, or environment variables. You can disable this later with `reasonix config telemetry off`.", CLITelemetryConsentPrompt: "Allow anonymous CLI usage statistics?", CLITelemetryConsentInvalid: "Please answer y or n.", CLITelemetryConsentSaveFailedFmt: "CLI telemetry remains disabled because the preference could not be saved: %v", CLITelemetryConsentCleanupFailedFmt: "CLI telemetry is disabled, but pending statistics could not be deleted: %v", UsageBody: `reasonix — a config- and plugin-driven coding agent (multi-model) Usage: reasonix [--model NAME] [-c|--continue] [-r|--resume [QUERY]] [--permission-mode MODE] [--effort LEVEL] [--add-dir PATH] interactive session reasonix -p|--print [--model NAME] [--output-format text|json|stream-json] [--allowed-tools RULES] [--add-dir PATH] reasonix run [--model NAME] [--max-steps N] [-c|--continue] [--resume PATH] [--copy] [--output-format FORMAT] reasonix run --events-jsonl [--model NAME] emit redacted structured events as JSONL reasonix review [--base BRANCH] [--commit SHA] [--model NAME] AI-powered code review on local diffs reasonix web [--model NAME] [--addr HOST:PORT] [--no-open] start the local Web UI and open it in the default browser reasonix serve [--model NAME] [--addr HOST:PORT] [--auth none|token|password] [--token STR] [--password STR] [--hash-password] serve over HTTP+SSE (with optional auth) reasonix acp [--model NAME] serve Agent Client Protocol over stdio (also: reasonix --acp) reasonix setup [path] interactive config wizard; writes reasonix.toml (+ .env) reasonix config reasoning-language [auto|zh|en] configure visible reasoning language reasonix config compact-ratio [--local] [30..85] configure automatic compaction threshold reasonix config telemetry [auto|on|off] configure content-free CLI usage metrics reasonix report [list|show|send|delete] [ID] review and explicitly send local CLI crash reports reasonix mcp manage MCP servers in reasonix.toml reasonix subagent manage and run isolated subagent profiles reasonix init show how to generate project memory (AGENTS.md) reasonix doctor [--json] print redacted local diagnostics reasonix doctor session [--zip] [--out PATH] export a session conflict diagnostic zip reasonix session list --json [--dir PATH] list redacted sessions for machine clients reasonix session show|status --json [--dir PATH] query one redacted session reasonix session recovery [] --json [--dir PATH] query redacted recovery state reasonix hook list|status --json [--dir PATH] inspect redacted hook state reasonix task list|show|status|events|stop|cancel|monitor|tmux --json [--dir PATH] inspect or control redacted tasks reasonix bot start|doctor|weixin-login multi-channel IM bot gateway reasonix upgrade [--check] [--force] update to the latest official release (also: reasonix update) reasonix completion bash|zsh|fish print a shell completion script to stdout reasonix version [--verbose|--json] print version (single line) or build metadata reasonix --version | -v single-line version (script-safe) reasonix help Examples: reasonix reasonix --continue reasonix --resume provider-config reasonix web reasonix run "implement the TODOs in main.go" reasonix run --model mimo-pro "add unit tests for this function" reasonix -p "summarize this repository" --output-format json reasonix subagent run review "review the current changes" echo "explain this code" | reasonix run Configuration: Resolution: flag > ./reasonix.toml > /config.toml > built-in defaults Secrets come from the environment via api_key_env (e.g. DEEPSEEK_API_KEY). Run 'reasonix setup' to scaffold a config; see docs/SPEC.md. `, }