# 1: destination variable
# 2: interface
# 3: path
# 4: separator
# 5: limit
__network_ifstatus() {
	local __tmp

	[ -z "$__NETWORK_CACHE" ] && {
		__tmp="$(ubus call network.interface dump 2>&1)"
		case "$?" in
			4) : ;;
			0) export __NETWORK_CACHE="$__tmp" ;;
			*) echo "$__tmp" >&2 ;;
		esac
	}

	__tmp="$(jsonfilter ${4:+-F "$4"} ${5:+-l "$5"} -s "${__NETWORK_CACHE:-{}}" -e "$1=@.interface${2:+[@.interface='$2']}$3")"

	[ -z "$__tmp" ] && \
		unset "$1" && \
		return 1

	eval "$__tmp"
}

# determine the IAID of the given logical interface
# 1: destination variable
# 2: interface
network_generate_iface_iaid() {
	local __iaid

	__iaid=$(printf '%s' "$2" | md5sum | cut -c 1-8)

	export "$1=$__iaid"
}

# determine first IPv4 address of given logical interface
# 1: destination variable
# 2: interface
network_get_ipaddr() {
	__network_ifstatus "$1" "$2" "['ipv4-address'][0].address";
}

# determine first IPv6 address of given logical interface
# 1: destination variable
# 2: interface
network_get_ipaddr6() {
	__network_ifstatus "$1" "$2" "['ipv6-address'][0].address" || \
		__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][0]['local-address'].address" || \
		return 1
}

# determine first IPv4 subnet of given logical interface
# 1: destination variable
# 2: interface
network_get_subnet() {
	__network_ifstatus "$1" "$2" "['ipv4-address'][0]['address','mask']" "/"
}

# determine first IPv6 subnet of given logical interface
# 1: destination variable
# 2: interface
network_get_subnet6() {
	local __nets __addr

	if network_get_subnets6 __nets "$2"; then
		# Attempt to return first non-fe80::/10, non-fc::/7 range
		for __addr in $__nets; do
			case "$__addr" in fe[8ab]?:*|f[cd]??:*)
				continue
			esac
			export "$1=$__addr"
			return 0
		done

		# Attempt to return first non-fe80::/10 range
		for __addr in $__nets; do
			case "$__addr" in fe[8ab]?:*)
				continue
			esac
			export "$1=$__addr"
			return 0
		done

		# Return first item
		for __addr in $__nets; do
			export "$1=$__addr"
			return 0
		done
	fi

	unset "$1"
	return 1
}

# determine first IPv6 prefix of given logical interface
# 1: destination variable
# 2: interface
network_get_prefix6() {
	__network_ifstatus "$1" "$2" "['ipv6-prefix'][0]['address','mask']" "/"
}

# determine first IPv6 prefix assignment of given logical interface
# 1: destination variable
# 2: interface
network_get_prefix_assignment6() {
	__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][0]['address','mask']" "/"
}

# determine all IPv4 addresses of given logical interface
# 1: destination variable
# 2: interface
network_get_ipaddrs() {
	__network_ifstatus "$1" "$2" "['ipv4-address'][*].address"
}

# determine all IPv6 addresses of given logical interface
# 1: destination variable
# 2: interface
network_get_ipaddrs6() {
	local __addr
	local __list=""

	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*].address"; then
		for __addr in $__addr; do
			__list="${__list:+$__list }${__addr}"
		done
	fi

	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address"; then
		for __addr in $__addr; do
			__list="${__list:+$__list }${__addr}"
		done
	fi

	if [ -n "$__list" ]; then
		export "$1=$__list"
		return 0
	fi

	unset "$1"
	return 1
}

# determine all IP addresses of given logical interface
# 1: destination variable
# 2: interface
network_get_ipaddrs_all() {
	local __addr __addr6

	network_get_ipaddrs __addr "$2"
	network_get_ipaddrs6 __addr6 "$2"

	if [ -n "$__addr" -o -n "$__addr6" ]; then
		export "$1=${__addr:+$__addr }$__addr6"
		return 0
	fi

	unset "$1"
	return 1
}

# determine all IPv4 subnets of given logical interface
# 1: destination variable
# 2: interface
network_get_subnets() {
	__network_ifstatus "$1" "$2" "['ipv4-address'][*]['address','mask']" "/ "
}

# determine all IPv6 subnets of given logical interface
# 1: destination variable
# 2: interface
network_get_subnets6() {
	local __addr __mask
	local __list=""

	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*]['address','mask']" "/ "; then
		for __addr in $__addr; do
			__list="${__list:+$__list }${__addr}"
		done
	fi

	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address" && \
	   __network_ifstatus "__mask" "$2" "['ipv6-prefix-assignment'][*].mask"; then
		for __addr in $__addr; do
			__list="${__list:+$__list }${__addr}/${__mask%% *}"
			__mask="${__mask#* }"
		done
	fi

	if [ -n "$__list" ]; then
		export "$1=$__list"
		return 0
	fi

	unset "$1"
	return 1
}

# determine all IPv6 prefixes of given logical interface
# 1: destination variable
# 2: interface
network_get_prefixes6() {
	__network_ifstatus "$1" "$2" "['ipv6-prefix'][*]['address','mask']" "/ "
}

# determine all IPv6 prefix assignments of given logical interface
# 1: destination variable
# 2: interface
network_get_prefix_assignments6() {
	__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][*]['address','mask']" "/ "
}

# determine IPv4 gateway of given logical interface
# 1: destination variable
# 2: interface
# 3: consider inactive gateway if "true" (optional)
network_get_gateway() {
	__network_ifstatus "$1" "$2" ".route[@.target='0.0.0.0' && !@.table].nexthop" "" 1 && \
		return 0

	[ "$3" = 1 -o "$3" = "true" ] && \
		__network_ifstatus "$1" "$2" ".inactive.route[@.target='0.0.0.0' && !@.table].nexthop" "" 1
}

# determine IPv6 gateway of given logical interface
# 1: destination variable
# 2: interface
# 3: consider inactive gateway if "true" (optional)
network_get_gateway6() {
	__network_ifstatus "$1" "$2" ".route[@.target='::' && !@.table].nexthop" "" 1 && \
		return 0

	[ "$3" = 1 -o "$3" = "true" ] && \
		__network_ifstatus "$1" "$2" ".inactive.route[@.target='::' && !@.table].nexthop" "" 1
}

# determine the DNS servers of the given logical interface
# 1: destination variable
# 2: interface
# 3: consider inactive servers if "true" (optional)
network_get_dnsserver() {
	__network_ifstatus "$1" "$2" "['dns-server'][*]" && return 0

	[ "$3" = 1 -o "$3" = "true" ] && \
		__network_ifstatus "$1" "$2" ".inactive['dns-server'][*]"
}

# determine the domains of the given logical interface
# 1: destination variable
# 2: interface
# 3: consider inactive domains if "true" (optional)
network_get_dnssearch() {
	__network_ifstatus "$1" "$2" "['dns-search'][*]" && return 0

	[ "$3" = 1 -o "$3" = "true" ] && \
		__network_ifstatus "$1" "$2" ".inactive['dns-search'][*]"
}


# 1: destination variable
# 2: addr
# 3: inactive
__network_wan()
{
	__network_ifstatus "$1" "" \
		"[@.route[@.target='$2' && !@.table]].interface" "" 1 && \
			return 0

	[ "$3" = 1 -o "$3" = "true" ] && \
		__network_ifstatus "$1" "" \
			"[@.inactive.route[@.target='$2' && !@.table]].interface" "" 1
}

# find the logical interface which holds the current IPv4 default route
# 1: destination variable
# 2: consider inactive default routes if "true" (optional)
network_find_wan() { __network_wan "$1" "0.0.0.0" "$2"; }

# find the logical interface which holds the current IPv6 default route
# 1: destination variable
# 2: consider inactive default routes if "true" (optional)
network_find_wan6() { __network_wan "$1" "::" "$2"; }

# test whether the given logical interface is running
# 1: interface
network_is_up()
{
	local __up
	__network_ifstatus "__up" "$1" ".up" && [ "$__up" = 1 ]
}

# determine the protocol of the given logical interface
# 1: destination variable
# 2: interface
network_get_protocol() { __network_ifstatus "$1" "$2" ".proto"; }

# determine the uptime of the given logical interface
# 1: destination variable
# 2: interface
network_get_uptime() { __network_ifstatus "$1" "$2" ".uptime"; }

# determine the metric of the given logical interface
# 1: destination variable
# 2: interface
network_get_metric() { __network_ifstatus "$1" "$2" ".metric"; }

# determine the layer 3 linux network device of the given logical interface
# 1: destination variable
# 2: interface
network_get_device() { __network_ifstatus "$1" "$2" ".l3_device"; }

# determine the layer 2 linux network device of the given logical interface
# 1: destination variable
# 2: interface
network_get_physdev() { __network_ifstatus "$1" "$2" ".device"; }

# defer netifd actions on the given linux network device
# 1: device name
network_defer_device()
{
	ubus call network.device set_state \
		"$(printf '{ "name": "%s", "defer": true }' "$1")" 2>/dev/null
}

# continue netifd actions on the given linux network device
# 1: device name
network_ready_device()
{
	ubus call network.device set_state \
		"$(printf '{ "name": "%s", "defer": false }' "$1")" 2>/dev/null
}

# flush the internal value cache to force re-reading values from ubus
network_flush_cache() { unset __NETWORK_CACHE; }
